ULTRALIFT Standard Mount (SM)
The UltraLift Standard Mount includes a patented sliding bracket that makes it the most versatile lifter in the industry and the easiest to install.

WHY IT IS THE MOST VERSATILE
1.You can install the mounting bracket at the top, lower area or under your cabinet. Regardless of where you mount your lifter- the rod will adjust to fit the height the cover when it’s in the open position.
2.Mid-mounting is the ideal lifter placement because it places the lifter at the ideal pivot point- unfortunately, not a lot of the newer cabinet models can accommodate the torque requirements due to lighter materials/PVC being used. Nevertheless, the standard mount offers three mounting options to best suit your tub’s design/placement. Top Mount, lower mount, and deck mount.
3.Deck Mounting; The patented sliding bracket allows the mounting bracket to be turned 90 degrees allowing the UltraLift to be installed on a deck- eliminating the need to screw into your cabinet

WHY IT IS EASY TO INSTALL
1.Unlike most traditional lifters, the mounting bracket does not require exact positioning on the cabinet. Plus, the sliding bracket allows this lifter to operate on almost any size spa.
2.The sliding bracket also allows the installer to avoid trim strips often located on the side of many spa cabinets. Most traditional lifters require installers to either cut the trim strip or install a spacer behind the bracket.

STANDARD FEATURES
•Aluminum brackets help protect from corrosion and rusting
•Steel arms help minimize bending caused by misuse and heavy winds that sometimes occur on traditional lifters with aluminum lifting arms
•Easy to use locking pins prevent lifter from closing when in the open position
•Unique pivot design allows for easy operation when opening and closing the cover
•The patented sliding bracket makes it ‘One Size Fits All’
•Can be operated from either side of the spa
•Can be mounted one of three ways for ultimate installation versatility

ULTRALIFT Hydraulic Mount Lifter (HM)
The UltraLift HM is similar to the UltraLift Standard Mount. The only difference is it includes dual gas shocks to make operating the spa easier. The Hydraulic Mount also includes the patented sliding bracket so it will work on almost any size spa.
Because it Lifts the cover straight up, it requires less space at the rear so it is ideal for spas located close to a wall area, in a gazebo or along a fence. You can side mount this lifter at the top of your spa, or deck mount it on in-ground tubs.

STANDARD FEATURES
• Aluminum brackets help protect from corrosion and rusting
• Steel arms to help minimize bending caused by misuse and heavy winds that sometimes occur on traditional lifters with aluminum lifting arms
• Easy to use locking pins prevent lifter from closing when in the open position
• Can be operated from either side of the spa
• Can be deck mounted on in-ground tubs
• Includes dual gas shocks for hydraulic assistance

ULTRALIFT Under Mount Lifter (UM)
The UltraLift Undermount Bracket includes an extended plate that is designed to slide under the spa for support, eliminating the need to drill into the spa cabinet or deck.

STANDARD FEATURES
• Aluminum brackets help protect from corrosion and rusting
• Steel arms help minimize bending caused by misuse and heavy winds that sometimes occur on traditional lifters with aluminum lifting arms
• Unique pivot design allows for easy operation in both opening and closing the cover
• Fits Spas up to 109” with a Radius up to 16”

VISIONLIFT by UltraLift (VL)
The Visionlift is one-of-a-kind. Using a dual shock system, it lifts the cover and places it behind the tub- providing the user with a clean visual line- allowing your client to see your backyard, socialize with guests and keep an eye on any children or pets while using their hot tub. The Visionlift provides a full 360 degree view. The Visionlift is UltraLift’s most universal fitting lifter.

STANDARD FEATURES
• Steel brackets to help protect from corrosion and rusting
• Galvanized arms help minimize bending caused by misuse and heavy winds that sometimes occurs on traditional lifters with aluminum lifting arms.
• Unique pivot design allows for easy operation in both opening and closing the cover
• The padded handle provides added comfort when using your lifter
• Dual gas pistons are positioned to make raising and lowering the cover behind the spa along with lifting and positioning it back on the spa.
• Can be operated from either side of the spa
• Easy to use locking pins prevent lifter closing when in the open position
• Dual vinyl straps pass through the crossover bar that sits across the cover and are attached to the cover with the use of Velcro. This helps prevents from unwanted lifting of the cover lifter by the gas shocks
• Your cover is lifted out of sight- granting a 360 degree view from your tub

ADDITIONAL OPTIONS AVAILABLE
• VISIONLIFT PADS: For spas located on concrete or stone surfaces 2 durable pads support the weight of the cover to help protect the cover when it is opened.

• EXTENDED PIVOT ARMS: Available for taller tubs using the Undermount or Standard Mount cover lifter.

• EXTENDED SLIDER PIVOT BRACKET: For use with larger radius tubs when installing the Standard Mount, Under Mount or Hydraulic Mount

• COVER LOCKS: Used to lock the cover when not in use. Available through Hot Tub Products.

lifters

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s